|
|
| 西門子QRA10.C系列火焰探測器-電眼 |
| QRA10.C系列火焰探測器-電眼
品牌：SIEMENS（西門子）
產地：德國 |
| 產品介紹 |
|
The flame detectors are used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving.
-
With this type of flame supervision, the UV radiation emitted by gas or oil flames is used to generate the flame signal.
-
The radiation detector consists of a UV-sensitive cell with 2 electrodes, which ignite when illuminated with radiation in the 190...270 nm range of the spectrum, thereby triggering a current in the flame detector circuit.
-
The UV cell does not respond to glowing firebrick in the combustion chamber, daylight or light from the boiler room illumination.
Die-cast aluminium housing with a 1 in. mounting coupling (D) and a connection facility for cooling air. The housing of this detector has a bayonet fitting which allows it to be secured either directly to the mounting coupling or to the glass holder AGG06. The mounting coupling can be screwed to a viewing tube or to the ball head AGG07. The Pg cable gland can be removed and replaced, if some other detector cable shall be used. | |
| 技術參數 |
| 主要參數 |
| UV單元平均壽命 |
10000小時（在50ºC） |
| 爐膛背壓 |
| - QRA10... |
50mbar最大 |
| - QRA10...+AGG03或AGG02 |
500mbar最大 |
| 保護等級 |
IP54 |
| 重量 |
| - AGG01 |
10g |
| - AGG02 |
10g |
| - AGG03 |
10g |
| - AGG05 |
170g |
| - AGG06 |
160g |
| - AGG07 |
1330g |
| - AGG16.C |
650g |
| - QRA10... |
740g |
| - QRA10...+AGG03 |
750g | | |
| 環境條件 |
| 運輸環境 |
IEC 60 721-3-2 |
| 內部條件 |
class 2K2 |
| 機械條件 |
class 2M2 |
| 溫度范圍 |
-20...+60ºC |
| 濕度 |
<95% |
| 運行環境 |
IEC 60 721-3-3 |
| 內部條件 |
class 3K5 |
| 機械條件 |
class 3M2 |
| 溫度范圍 |
-20...+60ºC |
| 濕度 |
<95% |
| 不得進水 | | | |
|
