|
|
| 西門子QRB1系列火焰探測器-電眼 |
| QRB1系列火焰探測器-電眼
品牌：SIEMENS（西門子）
產地：德國 |
| 產品介紹 |
|
Photoresistive flame detectors for use with Landis & Staefa burner controls, for the supervision of oil flames in the visible light spectrum. The flame detectors are used primarily in connection with burner controls for small burners.
-
With this type of flame supervision, the radiation of oil flames in the visible light spectrum is used for generating the flame signal.
-
The light-sensitive element is a photoresistor.
-
When there is no light, the detector′s resistance is in the MΩrange.
-
The resistance drops as the intensity of illumination increases (kΩrange).
-
In contrast to the selenium photocell of the RAR... detectors, glowing firebrick in the combustion chamber can be detected. | |
| 技術參數 |
| 主要參數 |
| 保護等級 |
IP40 |
| 當連接至LOA.../LAL...時，電纜長度 |
1.5m最大 |
| 連接電纜 |
2*0.75mm2,5.1mm直徑 |
| 重量 |
20...35g | | |
| 環(huán)境條件 |
| 運輸環(huán)境 |
IEC 60 721-3-2 |
| 內部條件 |
class 2K2 |
| 溫度范圍 |
-20...+60ºC |
| 濕度 |
<95% |
| 運行環(huán)境 |
IEC 60 721-3-3 |
| 內部條件 |
class 3K5 |
| 機械條件 |
class 3M2 |
| 溫度范圍 |
-20...+60ºC |
| 濕度 |
<95% |
| 不得進水 | | | |
|
